40W CO2 laser machine engrave plywood

CO2 ETA laser machine engraving plywood with 40W
High speed engraving plywood
Speed:400MM/S
Accelerated speed:12000MM/S

Mini Laser Carving Machine ETA 4040

Mini Laser Carving Machine ETA 4040

Working Area:

400MM X 400MM

Working Materials:

Wood,MDF,Plastic,Acrylic,Fabric,Leather,Paper,Ceramic,Glass,Metal,Rubber and so on.

Features:

1. The humanized industrial design has a clean and beautiful appearance. It is small in size and can be placed at home and office.

2. The laser beam is stable and in good quality, can cut and carve a variety of materials.We give out an extra laser tube,no need to re - adjust the optical path when replace new laser tube.

3. High precision, stable mechanical structure, X Y axis adopted imported linear guide, high working efficiency, machine maximum acceleration up to 3G.

4. The specially designed laser head is simple and convenient to focus.

With the world's advanced II-VI focusing lens.

5. The design of the drawing type honeycomb platform is convenient to feed and lower the material, and increases the length of the feed.

6. Modular design, can select the lifting platform, rotating shaft according to their own needs,for working thick materials and cylindrical materials.

7. The air purification module can be selected. The air purification module can purify the dust and odor produced in the work and ensure the cleanliness of the working environment.

The simple drawing software and operating system can identify hand-painted design. The zero base person can also operate the machine smoothly.Advanced offline control systematization, USB control and built-in large memory, the machine can work in a non computer environment.

How to solve the problem of laser marking machine-No laser

How to solve the problem of laser marking machine-No laser

Laser marking machine is that laser beam mark permanent marks on a variety of different material surfaces.Marking is the evaporation of surface material to expose the deep material, so as to carve out the exquisite patterns, trademarks and text. Laser marking machine is divided into, CO2 laser marking machine, play semiconductor laser marking machine, laser fiber play standard machine, YAG laser marking machine, the laser marking machine is mainly used to require some finer, the higher accuracy of the occasion. Used in electronic components, integrated circuits (IC), electrical appliances, mobile communications, hardware, tools, accessories, precision instruments, watch glasses, jewelry, auto parts, plastic buttons, building materials, PVC pipe.
But if the laser marking machine meet the problem-no laser,how should we do?
Fault phenomenon: the laser is not normal, in the high voltage side, the string into the current table, the current table shows the exception, or on a long time there is a current, or sometimes no, sometimes not controlled.The main reason is that the type of laser is not selected, the main board, the wiring board, the power supply or the control line and the cooling water cycle system.

Elimination method:        
1,Parameter settings, see if the type of laser is correct, it is the main reason for the failure of continuous light.  
2,Pull the nine core control line, to see whether there is a control line loose. Connection is not reliable.        
3,The power supply control line (nine cell lines) removed, according to the key burst of laser power supply, the power supply is still a motherboard failure analysis.
4.Press laser,if can out laser,that shows the laser power supply is well.
5.If press laser,can not our laser,that shows the laser power supply has problem.
6.When the power supply is well, connected to the control line, with a multimeter measuring connection plate on the switch control pin, no light, normal voltage in more than 4 volts, less than 3 V, motherboard output is not well; light emitting, the voltage should be below 2 volts, higher than 2.5 V output is not well.
7.Check whether the water cycle is well,the water flow is enough, whether there is a problem of water protection.