Jinan Xiaojia CNC Machinery Equipment Co.,Ltd: cnc machine

显示标签为“cnc machine”的博文。显示所有博文

2018年3月9日星期五

CNC Router engrave acrylic,wood,plastic,aluminum

CNC Router XJ-H6060
www.xjrouter.com
xjrouter@hotmail.com
Skype:sofiaxjw
Whatsapp:0086-15863786526

2016年5月15日星期日

Common failures and Solutions of CNC Router

Common failures and Solutions of CNC Router

Any machine can not be preserved intact for a long time,so we should learn to

judge the common faults and know how to solve them.Here we share some common failures and solutions of cnc router, and we mainly have the following 15:

Ⅰ, the spindle automatically turn or can not stop

1, control card failure;

2, inverter fault

II, when opening the software, the computer prompts "open the card failed,

please check the card" prompt

1, check the driver card is not installed, or to change a PCI card slot;

2, the two data connection line to re install, check there is no phenomenon of

broken needles;

3, the board has a problem, replace the board.

Ⅲ,Open the software when prompted: three axis alarm, initialization error four

1, check the computer and the machine two data lines have not received;

2, check the control box of the switch board of the fuse is burned, for the

fuse;

3, check the 85V power supply is normal

Ⅳ,CNC Router appear dislocation or wrong size

1, check the path of the software is correct or not;

2, check the gap size of the screw rod and the rod of the fastening screws are

not loose;

3, check the software parameter settings correct or not.

Ⅴ,When X axis working,the Z axis can not lift,give it the command go up,but it

go down.

1, check whether the Z axis motor run well,also check it's power and the drive

current.

2, check whether the Z axis motor line has bad contact or middle of the case.

Ⅵ,the spindle motor does not turn or reverse

1, check the setting parameters of the inverter;

2, the frequency of the signal line is connected to the inverter.

Ⅶ,Smashing knife phenomenon

1, Z axis motor power is not enough, the coupling loose;

2, Z axis drive current is too small, or signal line is wrong.

Ⅷ,When the software is turned on, the shaft is closed.

1, the problem of the driver or the computer output signal line contact is bad;

2, the motor line contact is bad.

Ⅸ,In the process of engraving, there is a limit phenomenon.

1, check the engraving path is beyond the scope of sculpture;

2, the soft limit of the parameters in the software settings.

Ⅹ,When turn on the machine, it doesn't work.

1, check the start button line is connected and the button is burnt out;

2, check whether the AC contactor short-circuit or burn out.

Ⅺ,Axis running only to one direction

1, check whether the normal work and the coupling line contact line is good;

2, check the motor line for a weld.

Ⅻ,Files cannot be opened normally, and the carved objects appear to be

deformed.

1, re install the new system and software;

2, check the X, Y axis screw

XIII,CNC Router's spindle motor suddenly stop or slow down in the process of

work

1, the operating voltage is not stable or super load, plus a voltage regulator

can be;

2, check the middle line is connected, whether there is a connecting thread.and screw is loose;

3, carving tools have problems.

XIV,When setting the origin of the engraving machine, sometimes forward, the

right offset distance

1, limit switch failure, the system back to the system in the process of the

origin of the limit switch has been closed and open. Change limit switch;

2, drive line loose. Try to fix it.

XV,CNC Router start reset, X axis, Y axis, Z axis position is uncertain

1, limit switch is bad (the limit switch is always closed), can change;

2, the drive line is bad (X axis 14 pin and 15 pin short circuit, Y axis 13 pin

and 15 pin short circuit, Z axis 31 pin and 15 pin short circuit), change the

drive line or short circuit can open;

3, the driver board is bad, change the drive board can.

2016年3月4日星期五

Good quality woodworking CNC Router XJ1325A

CNC Router XJ1325A

1.Working Area:1300MM X 2500MM X 180MM
2.Air Cooling Spindle 4.5KW
3.Taiwan Delta Inverter 5.5KW
4.Taiwan HIWIN Square Rails+Rack,Z axis Ball Screw
5.DSP Controller
6.Vacuum Table + T-Slot
7.Chinese Becker Vacuum Pump 5.5KW
8.Dust System

www.xjrouter.com www.xjrouter.es
Email:xjrouter@hotmail.com xjrouter@gmail.com
Skype:xjrouter
Whatsapp:0086-15863786526

Features

1. Whole machine seamless thicker profile steel structure.
2. Stepper motor driving system, high precision ball screw and Taiwan HIWIN square rail for transmission.
3. Air Cooling 4.5KW spindle.
4. Delta inverter-guaranteeing optimum performance and minimum failure.
5. DSP control system: Adopted advanced USB embedded DSP handles the operating system
6. Advanced file pretreatment function can correct the error in the files and is compatible with the process codes of multiple national and international software. (such as Mastercam, Typ3, Artcam, Caxa).

Application

1.Woodworking Applications:

waving board, cabinet door, solid wood door, craft wood door, no-paint door, folding screen, craft window, shoe polisher, game machine cabinet, Ma-jiang Table, computer table and panel type furniture.

2. Advertising Applications:

making advertising products made from Brand Board, Acrylic cutting, mould and some other materials processing.

3. Mould Area:

copper engraving, aluminium engraving, and nonmetallic moulds, like:plastic board, PVC pipe, wood sheet etc.

4.Other Applications:

Art and craft fields, embossment, photo engraving and so on.

2015年12月7日星期一

3 focus of laser cutting machine

1.Cutting focus is above the material

This way we are also known as the negative focal length, because the cutting point is not located in the surface of the cutting material is not located in the inside of the cutting material, but positioned at the top of the cutting material. This method is mainly used in the material with high cutting thickness. This approach is focused on the cutting material, mainly because of the need to cut a large plate, otherwise the nozzle delivery of oxygen is extremely prone to lead to problems and the resulting cut temperature. But one drawback of this approach is that the cutting surface is rough and less practical for the cutting of high precision.

2.Cutting focus is in material

This way is also known as the positive focal length. When you need to cut the workpiece for the stainless steel or aluminum plate when the cutting point in the workpiece inside the model. But one drawback of this approach is that, due to the focus principle of cutting surface, the cutting surface of the workpiece is larger than the cutting point at the same time, and this mode requires the cutting gas flow to be large, the temperature should be sufficient, and the time of cutting is slightly longer. So when you choose the material of the workpiece is mainly for stainless steel or aluminum lamp of the material selection of high hardness.

3.Cutting focus is on surface of material

This method is also known as the 0 focal length, usually in the SPC, SPH, SS41 and other parts of the cutting, the use of the cutting machine is used to focus on the workpiece surface, which is not the same as the upper and lower surface of the workpiece surface smooth, generally close to the focus of the cutting surface is relatively smooth, and far from the cutting of the lower surface is rough. This model should be based on the actual application of the upper and lower surface of the process requirements and set.

To sum up, we should use different focus mode when cutting different material or parts, can more play the performance advantages of laser cutting machine.

2015年10月11日星期日

Application industry of CNC Router

1.Advertising and gift production:

For all kinds of sculpture double color plate, organic glass, finetech stone doorplate, three-dimensional signs, decorative gift, box double color man statue, relief medal, block wall lamp house, light guide plate carving lamp house, organic board relief door.

2.Mold industry:

Engraving button relief mold printing, stamping die, injection mold, blow mold, stamping die,eyes mold.

3.Tobacco industry:

Used for packing cigarette anti-counterfeit mark, template and cigarette making wheel.

4.Printed circuit board (PCB) product development in the circuit, drilling, milling, etc.

5.Automotive industry: tire mold and accessories mold processing.

6.The printing industry: watermark mould and making coins mould.

7.Packing: Production of carton packaging bags stamping, plastic matrix mold.

8.Model making industry: making sand model, building model etc.

9.Seal industry: all kinds of fonts of various types of material seal engraving

10.Used in furniture industry, furniture decoration industry, woodworking decoration industry, musical instrument industry, wooden handicraft industry, furniture decoration industry, this machine is suitable for large area plate plane carving, wood furniture carving, wood carving, wood carving, wood carving, wood carving, wood carving, kitchen window door carving. Is the product of furniture decoration industry.

2015年9月17日星期四

How to choose the suitable tools for CNC Router when working different material?

Copy from www.xjrouter.com

Jinan Xiaojia CNC Machinery Equipment Co.,Ltd

As is known to all, we need to choose different cutting tools according to different materials, when using CNC Router.So which type tools suit what material?
There are a lot of people do not know much about it, here we summarize it simply , I hope they are helpful to you.

1.MDF material
We recommend the double long chip spiral milling cutter tool, it has two high-capacity flutes.Double-edged design, making it a good chip removal function, and achieve a good tool balancing.In the processing of MDF, the material is not black, do not smoke, tools can work with long life.